Materials and finishes
Translucent polyethylene natural colour ribbed diffuser, made by rotomoulding. Mass coloured opaque polyethylene top cover with an inner aluminium reflector.
In both cases, the polyethylene is treated as pellets to protect it from UV rays.
· Lower neck
The lower neck is in cast aluminium powder-painted grey, in the same colour as the top cover.
Reflector element manufactured by spinning in polished aluminium, housed inside the top cover.
It is recommended to assemble the luminaire on the Nikolson column (S&C). Optionally, the column can be delivered painted.
· Nikolson column 2.2m / 2.8m
Made from hot galvanized steel.
The base tube has a Ø127mm and a height of 1m, and incorporates a laser-cut door with triangular key anti-theft locking. The upper tube has a Ø100mm and a height of 2.2m / 2.8m. The ring connecting the two tubes is in press-moulded steel and is welded to the upper tube; the two tubes are welded together.
Luminaire for outdoor lighting, equipped for the installation of high intensity discharge lamp of high pressure sodium vapour or metal halide. It is supplied with power supply.
The street lamp is delivered assembled. The assembly instructions are enclosed with the street lamp. It is recommended to assemble the luminaire on the Nikolson column (S&C). Optionally, the column can be delivered painted. The columns are fixed using a concrete cube created in situ and anchor bolts, 20 cm below the level of the paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column. The fastening screws of the column and of the diffuser are in stainless steel.
Usual spare parts and maintenance for the units.
Luminaire: 10 Kg.
Column 3.20m: 40 Kg.
Column 3.80m: 46 Kg.