Key facts

Albertslund Ceiling
Louis Poulsen >
Jens Moller-Jensen >
Architonic ID:
Manufacturer groups :
Ceiling lights-General lighting >
Ceiling lights-General lighting >

Product description

The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source.

Galvanized, grey or white, powder coated.

Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Housing: Die cast aluminium.

Terminal block: 1x3x2.5mm². Cable entries: 2x top entry for Ø 20.3mm and 2x side entry. Looping: Approved, max. 3x1,5mm².

Product family


The design of the reflector ring directs the major part of the light downwards. The anti-glare ring shields the light source from direct view.

Info notes: The control gear for class I versions is placed in the fixture head. Control gear for the HI-C version is placed in the fixture head. For class II incandescent and vapour lamp versions, note that control gear for these versions is not supplied as standard and must be ordered separately (semi-parallel ballast/ignitor and capacitor) and placed in the pole. The class I vapour lamp versions with control gear in the fixture head are phase-compensated except from the HSE-E version which is not phase-compensated. Transition pieces for Ø 60mm and Ø 70mm pole can be bought as accessory parts.