Panic bar to EN 1125 | PS111XA10
Panic hardware from HEWI, Designed by NOA Produktdesign
Product description
System 111 panic bar
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
Category of use: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
Article no.: HEWI PS111XA10
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
Category of use: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
Article no.: HEWI PS111XA10
Concept
HEWI wrote design history with the lever handle 111. An ergonomic shape, glossy surfaces and characteristic colours enabled System 111 to become a true classic in architecture. A steel core inside the polyamide lever handle, perfected technology and careful workmanship using high-quality materials ensure enduring excellence. The U-shape of the lever handle enables the user to grip securely and has a pleasant feel. Numerous material options (polyamide and stainless steel), a high degree of functionality and selected colours still characterise the System 111 fittings to this day. Thanks to the comprehensive product range, System 111 can be used for many and diverse purposes.
More about this product
Part of the collection
HARDWARE.
Manufacturer
HEWI
Family
System 111 | Stainless steel
Architonic ID
1534764
Order number
PS111XA10
Year of Launch
2016
More products from HEWI
More products from System 111 | Stainless steel family
Downloads
Manufacturer’s Catalogues
Contact information
Address
Prof.-Bier-Straße 1-5, 34454 Bad Arolsen Germany
Map
This product has been discontinued.
More products from HEWI
More from
HEWIContact information
Address
Prof.-Bier-Straße 1-5, 34454 Bad Arolsen Germany
Map