Eckdaten

Produkt:
Rama
Familie:
Rama
Hersteller:
Santa & Cole
Designer:
Gonzalo Milá
Architonic ID:
1021545
Land:
Spanien
Erscheinungsjahr:
2000
Gruppen:
Außenleuchten-Platz-/Straßenleuchten
Stadtraum-Platz-/Straßenleuchten

Produktbeschreibung

Created from the Rama street lamp, whose light and stylized appearance it shares. An urban element with good light efficiency, it is installed vertically to give horizontal planes low-level light, illuminate accesses and highlight paths.

Materials and finishes

· Body- Profile with extruded aluminium alignment (6063) in a single piece. Sandblasted finish with anodized protection.
· Diffuser - Translucent white polycarbonate sheet.
· Base - Element manufactured in gravity flow aluminium alloy (AG3), which allows the body of the luminaire to be fixed and which houses the female connector of the electrical connection.
· Front cover - Access cover of the luminaire located at the front, manufactured with aluminium alloy sheet (6063) to which an EPDM sealing joint is stuck. Removing this cover allows the inner tray to be extracted for maintenance. Sandblasted finish and anodized protection.
· Inner tray - Extruded aluminium alloy profile (6063), in a single piece which acts as a reflector element, and as a support to fix the lampholder, with electronic equipment and male connector. Its extraction produces the electrical disconnection of the unit. Anodized protection.

Luminaire
Luminaire of 740 x 190 x 65 mm in anodized finish extruded aluminium, reflector in the same material and diffuser in translucent polycarbonate. Incorporates electronic equipment for 36 W TC-LEL type compact fluorescent lamp.

Installation
The beacon is delivered dismantled in two parts: base and luminaire.
The stainless steel fastening screws are delivered with the beacon.
The assembly instructions are enclosed with the beacon.

Maintenance
Usual spare parts and maintenance for the units.

Weight
12 Kg.

Energy Class: A +/ A /B / C / D / E

Produktfamilie

Konzept

Created from the Rama street lamp, whose light and stylized appearance it shares. An urban element with good light efficiency, it is installed vertically to give horizontal planes low-level light, illuminate accesses and highlight paths.

Materials and finishes

· Body
Profile with extruded aluminium alignment (6063) in a single piece. Sandblasted finish with anodized protection.
· Diffuser
Translucent white polycarbonate sheet.
· Base
Element manufactured in gravity flow aluminium alloy (AG3), which allows the body of the luminaire to be fixed and which houses the female connector of the electrical connection.
· Front cover
Access cover of the luminaire located at the front, manufactured with aluminium alloy sheet (6063) to which an EPDM sealing joint is stuck. Removing this cover allows the inner tray to be extracted for maintenance.
Sandblasted finish and anodized protection.
· Inner tray
Extruded aluminium alloy profile (6063), in a single piece which acts as a reflector element, and as a support to fix the lampholder, with electronic equipment and male connector.
Its extraction produces the electrical disconnection of the unit. Anodized protection.

Luminaire
Luminaire of 740 x 190 x 65 mm in anodized finish extruded aluminium, reflector in the same material and diffuser in translucent polycarbonate.
Incorporates electronic equipment for 36 W TC-LEL type compact fluorescent lamp.

Installation
The beacon is delivered dismantled in two parts: base and luminaire.
The stainless steel fastening screws are delivered with the beacon.
The assembly instructions are enclosed with the beacon.

Maintenance
Usual spare parts and maintenance for the units.

Weight
12 Kg.