Key facts

Product:
MegaZip comfort
Family:
Zip Comfort
Manufacturer:
Simes >
Order number:
S.8580W.19
Architonic ID:
20061560
Country:
Italy
Launched:
2019
Manufacturer groups :
Outdoor li...-Outdoor recessed floor lights >
Groups:
Outdoor li...-Outdoor recessed floor lights >

Product description

MEGAZIP SQUARE COMFORT

Art. S.8580W.19

MODULES LED 3000K 230V CRI 90 MacAdam step 3

Rated luminaire luminous flux: 1616lm

Rated input power: 27W

Luminaire efficacy: 60lm/W

Electronic ballast 220÷240V 50/60Hz

CE



Fixture available with integral DALI driver on request with surcharge.



LUMINAIRE TYPE

Inground walk over fitting. Recessing depth 240 mm. IP rating IP 65/67

MATERIAL CHARACTERISTICS

"Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5-3% molybdenum content. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process

1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity 1000 Kg

LIGHTING PERFORMANCE

Reflector in 99.98% pure anodized aluminium . Toughened transparent glass 12mm thick. Lamp adjustable ±15° position. LOR --

LOW SURFACE TEMPERATURE

Surface temperature of glass 40°C (Ta 25°C)

RECESSING BOX

Polypropylene recessing box with cable entry on all 4 sides also allows: 1) Easy wiring; 2) Cable management for IP68 fast connector; 3) Easy access to the fitting for maintenance purposes.

WIRING

Supply 0.5m cable section type H07RN-F secured by cable gland PG 13.5 (Ø 6÷12 mm) and sealed with B component epoxy resin, wired internally protected by silicon sheaths. Front re-lamping without removing the complete fitting . Isolation: CLASS I . Available colours: Stainless steel (cod.19). Weight: 6.9 Kg Glow Wire test: 850°C

L.E.D circuit included.

This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).

LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.



EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.

Product family

Concept

Zip, our historic family of in-ground walk-over fittings, has constantly evolved to achive greater and more precise lighting control. Today it comes with a renewed look thanks to the introduction of the comfort optic: a sophisticatd optical systems able to considerably reduce glare thanks to the retracted position of the LED. Available with many performing optics, different shapes and trims, ZIP is the right answer to the most difficult architectural challenges.