U.light 2
Bollards from LAB23
Product description
The U.LIGHT.2 bollard is in cold galvanised and polyester powder coated steel or stainless steel AISI 304, thickness 20/10.
U.LIGHT.2 consists of a tube bar with a diameter of 152 mm, laser cut on the upper side, with an inclination of 46 degrees where a plate is fixed through a continuous wire welding and finally coated. This makes the welding invisible.
U.LIGHT.2 is supplied with a LED lighting. 10x350 mm high holes are laser cut where two opal polycarbonate plates are placed. Inside the bollard there is a structure made of a squared section 40x40 mm, in galvanised steel on the top of which is fixed the LED light device.
There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.
Dimensions:
H = 850 mm
Bollard = 152 mm
Flange = 230 mm
U.LIGHT.2 consists of a tube bar with a diameter of 152 mm, laser cut on the upper side, with an inclination of 46 degrees where a plate is fixed through a continuous wire welding and finally coated. This makes the welding invisible.
U.LIGHT.2 is supplied with a LED lighting. 10x350 mm high holes are laser cut where two opal polycarbonate plates are placed. Inside the bollard there is a structure made of a squared section 40x40 mm, in galvanised steel on the top of which is fixed the LED light device.
There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.
Dimensions:
H = 850 mm
Bollard = 152 mm
Flange = 230 mm
More about this product
Part of the collection
BOLLARDS & BARRIERS.
Manufacturer
LAB23
Family
U.light
Architonic ID
1151448
Similar products
This product has been archived. Product information may no longer be up to date.