U.light 1
Bollards from LAB23
Product description
The U.LIGHT bollard is made out of cold galvanised and polyester powder coated, thickness 20/10 steel, (or in stainless steel AISI 304).
U.LIGHT.1 consists of a d 152 mm tube, laser cut on the upper side, with an inclination of 46 degrees where a plate is fixed through a continuous wire welding and then coated to make the weld invisible.
There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.
LED lighting version:
U.LIGHT.1 can be supplied with a LED lighting. In this case the tube bar is laser cut, obtaining a piercing 10x200 high, with an internal opal polycarbonate plate. A galvanised steel structure with the LED light device is situated inside the bollard.
Dimensions:
H = 450/800 mm
Bollard = 152 mm
Flange = 230 mm
U.LIGHT.1 consists of a d 152 mm tube, laser cut on the upper side, with an inclination of 46 degrees where a plate is fixed through a continuous wire welding and then coated to make the weld invisible.
There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.
LED lighting version:
U.LIGHT.1 can be supplied with a LED lighting. In this case the tube bar is laser cut, obtaining a piercing 10x200 high, with an internal opal polycarbonate plate. A galvanised steel structure with the LED light device is situated inside the bollard.
Dimensions:
H = 450/800 mm
Bollard = 152 mm
Flange = 230 mm
More about this product
Part of the collection
BOLLARDS & BARRIERS.
Manufacturer
LAB23
Family
U.light
Architonic ID
1151447
Similar products
This product has been archived. Product information may no longer be up to date.