The PUNKA seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of two elements welded through a continuous wire welding and then polished, making the welding invisible. The first sheet plate is bent on 4 points with angles of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides.
The ground fixing is possible thanks to four holes with a 10 mm diameter.
T. = 450 mm
Length = 1200/1800 mm
Width = 500 mm
Width of the feet 130 mm