Liberty by LAB23



Designer Studio Orange
Architonic id 1167121

Send page
Print page
Save page
The LIBERTY bin consists of 24 steel EN10111DD1 fascias, which are curved on the central part with a radius of 1447,8 mm and then welded to two solid laser shaped rings in steel EN10111DD1, T. 10 mm. At a height of 397 mm, is fixed a reinforcing fascia in steel EN10111DD1, 50×3 mm. At the base of the bin is welded a pressed box in steel EN10111DD1, 420xh20 mm, T. 15/10, which has a galvanised steel EN10346Dx51D+z, container inside, T. 10/10. On the upper part of the internal container there are 2 oval holes which act as handles, dimensions 120×60 mm. The container itself is reinforced by a border h 10 mm and w. 5 mm, in order to contain an elastic rope, D 10 mm, to fix the waste sack. At the base there are 4 holes, Ø 10 mm, for the ground fixing with appropriate bolts.
All the elements in steel EN10111DD1 are cold galvanised and polyester powder coated.

h = 795 mm
Diameter = 500 mm
Capacity = 80 Lt

More More
Similar products