- Crossed Bin
- Stéphane Chapelet
- ID de Architonic:
Descripción de producto
On the upper part of the internal container there are two oval holes, 120x60 mm, which act as handles.
The container is reinforced by a border, H 10 mm and Width 5 mm, helpful to adjust an elastic cord, D. 10 mm, used to fix the waste sack and it is placed on a steel EN10111DD1 ring, T. 30/10, welded on the internal circumference of the bin.
The cover of CROSSED is made of cold galvanised and polyester powder coated steel (or Corten treated with an oxidation cycle), thickness 40/10.
The latter is fixed to the body of the bin through a strong hinge with three wings, T. 30/10. The bin itself is ensured by a spring lock with a triangular key.
At the centre of the cover there is a hole, D. 260 mm, while on the bottom of the bin there are 3 holes, D. 10 mm, for the ground fixing with appropriate bolts.
Superior diameter = 420 mm
H = 600 mm
Capacity 30 Lt
All fixings in stainless steel AISI 304