Sigma Power LED / 316L Stainless Steel Frame - Version With Springs - Narrow Beam 10°

Outdoor recessed ceiling lights from Ares

Product description

518005
NATURAL WHITE 4000K
POWER LED
2,2W/24Vdc
Total power 3,4W
lm LED 198 ≠ lm OUTPUT 138
CRI >80
Remote electronic power supply to be ordered

518006
WARM WHITE 3000K
POWER LED
2,2W/24Vdc
Total power 3,4W
lm LED 182 ≠ lm OUTPUT 127
CRI >80
Remote electronic power supply to be ordered

Concept

• Round luminaire for installation on wall, ceiling or ground – recessed.
• Configuration: turned aluminium body (EN AW-6060 alloy) with 15 micron anodizing for high resistance to corrosion. AISI 316L or aluminium cap, open frame and cover (see the catalogue pages for reference). Diffuser: polycarbonate or methacrylate transparent or sandblasted (see the catalogue pages for reference).
• Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection rating: IP67
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: the luminaire is equipped with a piece of
cable for an easy-to-make connection. In-ground version: the cable is integrated with an H20 STOP device. Sigma is equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation in solid surfaces requires a dedicated box for installation to be purchased separately, installation in panels is only possible with the version with springs. It is important to provide for the in-ground version a >200mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
• Parallel wiring
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection degree of the luminaire.

.1 White
.6 Grey
.3 Anthracite
.4 Black
.18 Deep Brown

More about this product

Part of the collection CEILING RECESSED.
Manufacturer Ares
Family Sigma
Architonic ID 1340872
Order number 518005
Year of Launch 2012

Similar Manufacturers

Related Projects

This product has been archived. Product information may no longer be up to date.

Similar Manufacturers

Similar products to Sigma Power LED / 316L Stainless Steel Frame - Version With Springs - Narrow Beam 10°