The PIPE tubular light is made from heatresistant borosilicate glass with an external diameter of 25mm/1” and a maximum length of 2000mm/78”. Three different finishes are available: transparent glass, matt glass or half transparent/half matt. With the half matt/half transparent version, the length of the tube is, for technical reasons, limited to a maximum of 1500mm/59”. The lamps are preinstalled in the tube, the distance between each lamp being 100mm/4”. We preinstall10W lamps for tubes up to 1000mm/39” in length and 5W lamps for tubes of greater length. Where the lights are to be mounted wall-to-wall or mounted parallel to the wall by means of angle brackets, we can also supply 10W lamps for tubes of a length in excess of 1000mm/39”. Please specify the precise distance from the center of the jack to the center of the opposite jack. The tube light can be mounted wall-to-wall or, by using angle brackets, parallel to a wall. Multiple lengths can be connected using mounting brackets. For wall to wall specify distance between walls. For angle brackets measure to back of brackets. With the PIPE TUTTO version we offer a complete surface mount luminaire including transformer housing in three different lengths.
Designer: Peter Steng
LIGHT BY STENG | The latest products