Distesa

The DISTESA seat consists of two solid steel EN10111DD11 structures, T. 40/10, bent in three points with a radius of 20 mm, creating a triangular structure with dimensions 460 x H. 460 mm and diagonal 630 mm. Both the structures are linked by a seat, which is made of steel EN10111DD11 or stainless steel AISI 304 tubes, D. 16 x 2 mm, fixed on appropriate laser-shaped supports screwed on end supports with M8 screws. On the central part of the seat is fixed a reinforcing profile in steel EN10111DD11 or stainless steel AISI 304 creating a “C” figure, T. 30/10.
Ground fixing is possible thanks to four holes with a 10 mm diameter.
All the steel elements are galvanised and polyester powder coated.
All fixings in stainless steel AISI 304.

Maximum dimensions
H= 460 mm
Length = 1600 mm
Width = 480 mm
Width seat = 450 mm