DalMarbre by Dalsouple

DalMarbre

Manufacturer Dalsouple

Designer Dalsouple
Architonic id 1079322

Send page
Print page
Save page
QR-Code
DalMarbre is available in 10 standard colourways or your custom colourway with no minimum quantity.

DalMarbre is available in DalUni smooth finish and DalMicro.

DalMarbre is a marbled colour range. The marbling is random and will result in shade variations within each tile and between tiles.

Natural or synthetic
You can now choose to have your Dalsouple floor made in either standard synthetic SBR rubber, or DalNaturel natural rubber, the eco-friendly alternative. DalNaturel is available in all but the very palest colours in the range. To find out if your choice is available in DalNaturel, just contact us.

Colour availability
There are 10 standard colourways in the DalMarbre range. You can also create your own custom DalMarbre finish. Just select your colour combination and percentages and we will make you a real sample. There is no additional cost and no minimum quantity for this custom design service.

Colour reproduction
The colours shown on this site are as accurate as possible. However, for an exact colour match we recommend you ask us for a real colour sample before ordering.

Colour variation
Because we make all our products to order, it is essential that all the material required for each installation is ordered in one batch to avoid variation in colour. If you order more than one Dalsouple product in the same colour, for example DalTex and DalUni, due to batch manufacturing it is not possible to obtain an exact colour match between the two products.

DalMarbre is a marbled colour range. The marbling is random and will result in shade variations within each tile and between tiles.

Finish
DalMarbre is available in DalUni smooth finish and 7 DalMicro finishes.

Tile Size
DalMarbre tiles with DalUni smooth finish:
340mm x 340mm
1760mm x 680mm
or 610mm x 610mm for access panels.

DalMarbre with DalMicro:
1760mm x 680mm.

Thickness
DalMarbre tiles:
1.5mm, 2mm, 2.5mm
3mm, 3.5mm, 4mm or
4mm with eco backing.

DalMarbre with DalMicro:
2.5mm or 4mm (with eco backing) depending on finish.
Special thicknesses are available to order.

Dalsouple recommends a minimum thickness of 2.5mm for flooring use. The thinner the floorcovering the more visible the subfloor imperfections will be.

Performance
Anti-slip
Anti-static
Noise absorbent
Cigarette burn resistant
Tough
Easy to maintain

Uses
Indoor surfaces and floors,
walls, columns and furniture

Slip resistance
Dalsouple rubber is designed to offer a good degree of slip resistance underfoot in dry conditions. However, it can still be slippy when wet. To minimise the risk of slippage, it is important to use effective entrance matting around all external entrances, and to use signs when cleaning takes place

Special qualities
Available on request: oil and grease resistant, dissipative, electrically conductive, EFT extra flame resistant, low smoke and EFR, outdoor quality, WFR Class 'O� for use on walls on ceilings, MFR marine fire resistant, EUVS (extra UV stabilised). Due to technical limitations, not all colours are available in these qualities.


Product group: Resilient floors Flooring units Floor tiles Natural-rubber flooring Rubber flooring Natural-rubber tiles Floor tiles natural rubber Natural-rubber floors beige Natural-rubber floors blue Natural-rubber floors grey Natural-rubber floors green Natural-rubber floors red Natural-rubber floors black Natural-rubber floors pink/magenta Natural-rubber floors white

More More
Similar products