606 Universal Shelving System

Name: 606 Universal Shelving System
Brand: De Padova

Shelving from De Padova

Search products by image

Product description

Shelving and storage system with unmatched flexibility

UPRIGHTS: used to create partition shelving. The uprights support
these shelves and are fitted and secured to the floor and ceiling.
Therefore, it is important to check the hold and tightness of the
ceilings. The uprights for partition shelving cannot be fitted when
there are false ceilings of any kind. In case of false ceilings, please
note that the uprights can be fitted ONLY when they are close to
wall, fastened through wall brackets. The uprights can be adjusted
in height by 4 cm at the top and 4 cm in the lower part by adjusting
the end elements. The uprights must be properly matched
with the profiles.
EXTENSIONS: used to increase the height of uprights.
BRACKETS: used for wall-mounted shelving systems installed with
uprights. They are necessary for wall fixing. Their use is highly recommended
when shelves have to hold a great deal of weight and
for all uprights that are higher than 3 m.
REINFORCEMENT CROSSPIECES: used solely for shelving with uprights.
They should be installed in every span, one for each meter
of height (e.g. 3 crosspieces for 3 meters in height).
PROFILES: used to mount and attach shelves. To be used both for
wall shelving and for uprights. The spacing of the holes for the
positioning of the shelves differs in the 11 cm and 39.5 cm profiles,
so one or the other should be used. In case of wall profile, please
check the wall firmness in order to choose the suitable anchor.
Materials:
UPRIGHTS, PROFILES, REINFORCEMENT CROSSPIECES AND EXTENSIONS:
in satin-finished or matt black anodised or matt white
powder coated extruded anodized aluminium. Lower and upper
adjustment screw of uprights in steel. Plate in powder coated aluminum.
Wall bracket in powder coated aluminium.
SHELVES: in satin-finished anodised aluminium sheets or matt
black finish, or in powder coated aluminium, matt white.
DRAWER UNITS AND WRITING DESK: in satin-finished anodised
aluminium sheets or matt black finish, or in powder coated aluminium,
matt white. The drawers are installed on runners with
soft-close system.
CABINETS: in satin-finished anodised aluminium sheets or matt
black finish, or in powder coated aluminium, matt white. Door
core in MDF. Internal supports in thermoplastic material for the
aluminium shelf of the cabinet with concealed door.
PLATES FOR UPRIGHTS AND WALL BRACKETS: in powder coated
aluminium casting, silver, black or matt white coloured.