Division | Division BIG letterbox - BI-Color Edition - Comelit Switch VIDEO complete set - 2-wire

Stainless steel Division BIG pillar mailbox- BI-Color Edition- Comelit Switch VIDEO complete set Wifi- 2-wire The Division pillar mailbox with its solid 10mm design panel is a top-class model among the mailboxes. The 2mm front panels made of stainless steel V2A 1.4301 in the colour of your choice are mounted on a 5mm stainless steel frame. Characterised by the idea of sustainability, this letterbox was developed on the basis of the Designer collection with exchangeable panels. All panels can be replaced at any time, whether a new video intercom system, a new house number or a change of lettering, all panels can be easily exchanged. The Division BIG model has a newspaper insertion flap for newspapers, magazines and book mail. Integrated Comelit VIDEO complete set Wifi. The Comelit video intercom is an innovative solution with features such as facial recognition, voice commands and operation via app with your smartphone. Completely pre-programmed for easy installation- connect 2 wires and DONE! A real eye-catcher among letterboxes. Clear lines and no-frills design are the hallmarks of the Division letterbox. Our products have a high quality, reliable functionality and their own identity. Made by Briefkasten Manufaktur. Floor-standing letterbox made of stainless steel V2A 1.4301, 2mm front panels + 5mm frame powder-coated in RAL of your choice. Optionally also available as surface-mounted version with surface-mounted box in stainless steel, 240 grain polished. 2nd panel with door communication made of stainless steel V2A 1.4301, powder-coated in RAL 9005 deep black fine structure matt Front-side post removal door 350 mm x 300 mm, to be opened from top to bottom. Incl. 2 keys with key number. Mail slot from front, dimensions of slot: W 35 cm x H 6.3 cm, C4 landscape. Very large letters fit in here without bending. Attention: No removal protection! 8-12V DC short-stroke bell push button with LED ring lighting (blue, white, red or green). The illumination of the bell push buttons cannot be supplied via the control unit. It must be connected to an additional 8-12 V DC power supply. Optionally replaceable nameplate made of stainless steel with laser inscription or nameplate made of Plexi. Optionally with house number approx. 50-70mm high (height depends on number of characters) and inscription 10-70mm (height depends on number of characters) backed with stainless steel, polished or backlit in white incl. EVN LED power supply unit / transformer IP65 12V/DC 0.1?4W for LED illumination of the house number. An 8-12V DC short-stroke light switch with pictogram is available as an option. The W 40 mm x D 80 mm pillars are made of 2mm stainless steel V2A 1.4301, powder-coated in RAL colour for setting in concrete or screw mounting. Invisible cable routing through the columns. Important information Camera or intercom preparation The intercom systems must be connected by an electrician. Contact your trusted electrician for planning, mounting and installation. Water protection To achieve optimum water protection for your mail, the letterbox or letterbox system should, if possible, be located under a canopy. If you are installing this system completely free-standing, it is recommended that you use a rain canopy. Close-fitting self-adhesive rain cover enclosed. The mail is only protected from water if it is completely inserted in the box and the insertion flap is closed. Mail that is not completely inserted allows moisture and dirt to penetrate the letterbox. It is therefore necessary to plan sufficiently dimensioned letterboxes for the upcoming demand. This system is protected against water ingress in accordance with DIN EN 13724. Water ingress is not a reason for complaint.