Detalles de contacto
Enviar un mensaje
1/42
Acerca de este producto
Architonic ID: 1548553
SKU: 1511E6EV1
The new canopy system VD1511 has the same features as the VD1510 system, but in addition, on-site tolerances can now be easily compensated. The cylindrical holes provide sufficient clearance and once mounted, the fastening bolts are concealed with a form-fitting cladding.• Connector rods are not required
• Easy assembly and conceald fastening bolts
• Glass width max. 3000 mm
• 17.52 mm LSG made of HSG with SentryGlas® interlayer
• Max. 1100 mm cantilever span
• Up to 3,98 kN/m2 load
• Numerous profiles can be mounted in a series
• No edge recesses in the glass panel are required
• Only the lower glass panel of the laminate requires holes for
securing (no risk of drill offset in the laminate)
Concepto
The advantages of the approved Pauli range. The product range with its National Technical Approval offers unique and tested design possibilities. It includes cantilever canopy systems as well as connector rod systems from inexpensive models to highend design systems and overhead glazing with point fixtures and substructures. Desires for maximum dimensions and spans as well as problem solving solutions for your planning requirements. For example, both internal and external corners, rounded glass forms and countersink fixtures are part of the approval. With the help of approx. 100 Dimensioning diagrams the systems enable you to design your projects quickly and easily and can be installed without further verification.
Este producto pertenece a la colección:
Especificaciones
Category
Sistemas de anclaje puntual
Usage
Construcción interior