Key facts

Product:
Movit square 320 asymmetric
Family:
Movit
Manufacturer:
Simes >
Designer:
Klaus Begasse >
Order number:
S.3070W
Architonic ID:
1258975
Country:
Italy
Launched:
2014
Manufacturer groups :
Outdoor lighting-Outdoor wall lights >
Outdoor lig...-Outdoor floor-mounted lights >
Outdoor lighting-Street lights >
Outdoor lighting-Facade lights >
Groups:
Outdoor lighting-Outdoor wall lights >
Outdoor lig...-Outdoor floor-mounted lights >
Outdoor lighting-Street lights >
Outdoor lighting-Facade lights >

Product description

MODULES LED 3000K 230V CRI 90 MacAdam step 3
Rated luminaire luminous flux: 2795lm
Rated input power: 42W
Luminaire efficacy: 67lm/W
Electronic ballast 220÷240V 0/50/60Hz
CE - ENEC 03

Fixture available with integral DALI driver on request with surcharge.

PRODUCT TYPE
Projector. IP rating IP 65
MATERIAL CHARACTERISTICS
Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Extruded EN AW-6060 aluminium structure (arm version) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10
LIGHTING PERFORMANCE
Reflector in 99.98% pure anodized aluminium HI-GRADE . Clear toughened glass. LOR --
INSTALLATION AND MAINTENANCE
The tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. The pre-wired connecting wall plaquette and its fast connector make the installation and maintenance process quick, easy and safe.
WIRING
Supplied with a 1,5m pre-wired H05RN-F cable ( 0,1m for MOVIT 320mm ) and fast connector . Isolation: CLASS I . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 4.1 Kg Glow Wire test: --
Lamp included.
MOVIT REGISTERED DESIGN
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.

Product family

Concept

MOVIT is a new extraordinary LED projector for ground or wall installation. It can be used as direct or indirect light and it’s also available with arm. MOVIT has elegant proportions and a smaller visual impact than traditional projectors, easy to install and available with asymmetric and symmetric reflector. It covers a wide range of applications and gives to all designers a high flexibility of use.