Key facts

Product:
Minipool
Family:
Pool
Manufacturer:
Simes >
Order number:
S.3617.19
Architonic ID:
1243643
Country:
Italy
Manufacturer groups :
Outdoor lighti...-waterproof outdoor lights >
Groups:
Outdoor lighti...-waterproof outdoor lights >

Product description

MODULES LED 6000K 24V CRI 70
Rated luminaire luminous flux: 891lm
Rated input power: 20W
Luminaire efficacy: 45lm/W
Without trasformer
CE

PRODUCT TYPE
Submersion luminaire. IP rating IP 68
MATERIAL CHARACTERISTICS
Talc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Toughened transparent glass 10mm thick MICROPOOL, 12mm thick MINIPOOL/POOL . Mechanical resistance IK 10 Silicone gaskets.
LIGHTING PERFORMANCE
The holes along the ring of the luminaire allow for water circulation and work as an effective cooling system:
the water enters the lower holes, circulates inside the recessing box and, once it's heated,
it flows out of the upper holes. Lamp fixed position. LOR --
RECESSING BOX
Recessing box in technopolymer with front ring in stainless steel AISI 316L with cable entry on all 4 sides also allows: 1) Easy wiring; 2) Easy access to the fitting for maintenance purposes.
WIRING
Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (2 x 1.5 mm²) cable type H07RN8-F for MICROPOOL, 6 m. cable (2 x 2,5 mm²) cable type H07RN8-F for MINIPOOL and 8 m. cable (2 x 2,5mm²) cable type H07RN8-F for POOL closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Corrugated plastic pipe 5m long for MICROPOOL and MINIPOOL, 7m long for POOL. MICROPOOL, MINIPOOL and POOL with cold white led work also with traditional systems 12V CA (proper to substitute existing lamps for swimming pool with magnetic transformer 230V/12V CA). Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 3.7 Kg
Lamp included.
Not suitable for immersion in sea water.
Suitable for swimming pools in concrete and metal, recessed to the wall and on the bottom.
POOL REGISTERED DESIGN
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

Product family

Concept

POOL is a high performance submersion luminaire designed specifically for swimming pools and freshwater. Available in three dimensions, it is equipped with halogen lamps and LED light sources, monochromatic and RGBW, for emotion and charm underwater.