Key facts

Product:
MegaFlat comfort
Family:
Flat Comfort
Manufacturer:
Simes >
Order number:
S.7980W.09
Architonic ID:
20061552
Country:
Italy
Launched:
2019
Manufacturer groups :
Outdoor li...-Outdoor recessed floor lights >
Groups:
Outdoor li...-Outdoor recessed floor lights >

Product description

MEGAFLAT COMFORT
Art. S.7980W
MODULES LED 3000K 230V CRI 90 MacAdam step 3
Rated luminaire luminous flux: 1616lm
Rated input power: 27W
Luminaire efficacy: 60lm/W
Electronic ballast 220÷240V 50/60Hz
CE

Fixture available with integral DALI driver on request with surcharge.

LUMINAIRE TYPE
Inground drive over fitting. Recessing depth 195 mm. IP rating IP 65/67
MATERIAL CHARACTERISTICS
""Copper Free"" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 3 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10 Maximum load capacity 3500 Kg
LIGHTING PERFORMANCE
Reflector in 99.98% pure anodized aluminium . transparent Toughened glass 19mm thick. Lamp adjustable ±15° position. LOR -- Compact electronic ballast to guarantee better lamp stability, lifetime and reduced energy consumption.
LOW SURFACE TEMPERATURE
Surface temperature of glass 52°C (Ta 25°C) Electronic Ballast generating less heat.
Specific layout of internal components allow for better heat dissipation therefore limiting the temperature generated inside the fitting.
RECESSING BOX
Recessing box in Polypropylene with cable entry on all 4 sides also allows: 1) Easy wiring; 2) Cable management for fast connector; 3) Easy access to the fitting for maintenance purposes.
WIRING
Supply 0.5m cable section type H07RN-F secured by cable gland PG 13.5 (Ø 6÷12 mm) and sealed with B component epoxy resin, wired internally protected by silicon sheaths. Fast connector M20 (Ø 5÷14 mm) supplied as standard for single cable connection . Connector housed inside the recessing box . Front re-lamping without removing the complete fitting . Isolation: CLASS I . Available colours: Black (cod.09). Weight: 8.8 Kg Glow Wire test: 750°C
L.E.D circuit included.
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

Product family

Concept

RING-FLAT is an innovative combination of low recessing depth, high mechanical resistance and excellent lighting performance. RING-FLAT is available in 4 different sizes
and, through the use of state-of-the-art cowls, the optical system is glare free, highlighting the importance of visual comfort required when using LED sources.