Key facts

Product:
Continuous Rod Minimal Recessed 1m
Family:
Continuous Rod Minimal
Manufacturer:
Simes >
Order number:
S.2321W
Architonic ID:
1540238
Country:
Italy
Manufacturer groups :
Outdoor lig...-Outdoor recessed wall lights >
Outdoor ...-Outdoor recessed ceiling lights >
Outdoor lighting-Facade lights >
Groups:
Outdoor lig...-Outdoor recessed wall lights >
Outdoor ...-Outdoor recessed ceiling lights >
Outdoor lighting-Facade lights >

Product description

CONTINUOUS ROD MINIMAL RECESSED
Art. S.2321W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 800lm
Rated input power: 11.5W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD MINIMAL RECESSED
Art. S.2312W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 1600lm
Rated input power: 23W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD MINIMAL RECESSED
Art. S.2313W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 2400lm
Rated input power: 34.5W
Luminaire efficacy: 70lm/W
Without trasformer
CE

PRODUCT TYPE
Wall mounted luminaire. IP rating IP 67
MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion
resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 caps for the extruded parts. Mechanical resistance IK 08 Maximum load capacity --
LIGHTING PERFORMANCE
Continuous light source made of opal silicone. Lamp fixed position. LOR --
INSTALLATION AND MANTEINANCE
Cuttable sections of 5cm: The light source and the aluminium profile of CONTINUOUS ROD can be easily sectioned. The circuitry length may be reduced to sections of 5cm and multiples. The lighting body is supplied in modules of 1, 2 or 3m, joinable up to the desired length, while the light source is supplied in a maximum length of 6m.
45° Application: Applications at an edge only for COMFORT versions. The aluminium profile must be cut at 45° (please refer to the explanations reported on the instruction sheet).
WIRING
Supply 0.5m cable section type H07RN-F. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: Kg Glow Wire test: --
Lamp included.
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.

Product family

Concept

Continuous Rod Minimal is a linear luminaire made of a performing IP65 rated LED Strip and a thin aluminium profile in which it is embedded. It comes in two versions, surafce - and recessed mount and the specific accessories available upon request designed around the standard luminaire significantly widen the applications.
A straight connector allows a continuous installation of Minimal Rod to create uniform light lines at the desired length. The angular acessories can create angles at 90° for single flat surfaces or for two perpendicular flat surfaces. A specific recessed box to house the luminaire enables the installation in brick or cast concrete walls. The light intensity can be modulated with 24V remote dimmable power supplies.