Continuous Rod Comfort Surface 1m

Outdoor wall lights from Simes

Product description

CONTINUOUS ROD COMFORT SURFACE
Art. S.2351W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 800lm
Rated input power: 11.5W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD COMFORT SURFACE
Art. S.2352W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 1600lm
Rated input power: 23W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD COMFORT SURFACE
Art. S.2353W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 2400lm
Rated input power: 34.5W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD COMFORT SURFACE
Art. S.2354W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 3200lm
Rated input power: 46W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD COMFORT SURFACE
Art. S.2355W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 4000lm
Rated input power: 57.5W
Luminaire efficacy: 70lm/W
Without trasformer
CE

CONTINUOUS ROD COMFORT SURFACE
Art. S.2356W
MODULES LED 3000K 24V CRI 90
Rated luminaire luminous flux: 4800lm
Rated input power: 69W
Luminaire efficacy: 70lm/W
Without trasformer
CE

PRODUCT TYPE
Wall mounted luminaire. IP rating IP 67
MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion
resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 caps for the extruded parts. Mechanical resistance IK 08 Maximum load capacity --
LIGHTING PERFORMANCE
Continuous light source made of opal silicone. Lamp fixed position. LOR --
INSTALLATION AND MANTEINANCE
Cuttable sections of 5cm: The light source and the aluminium profile of CONTINUOUS ROD can be easily sectioned. The circuitry length may be reduced to sections of 5cm and multiples. The lighting body is supplied in modules of 1, 2 or 3m, joinable up to the desired length, while the light source is supplied in a maximum length of 6m.
45° Application: Applications at an edge only for COMFORT versions. The aluminium profile must be cut at 45° (please refer to the explanations reported on the instruction sheet).
WIRING
Supply 0.5m cable section type H07RN-F. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: Kg Glow Wire test: --
Lamp included.
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.

PRODUCT TYPE
Wall mounted luminaire. IP rating IP 67
MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion
resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 caps for the extruded parts. Mechanical resistance IK 08 Maximum load capacity --
LIGHTING PERFORMANCE
Continuous light source made of opal silicone. Lamp fixed position. LOR --
INSTALLATION AND MANTEINANCE
Cuttable sections of 5cm: The light source and the aluminium profile of CONTINUOUS ROD can be easily sectioned. The circuitry length may be reduced to sections of 5cm and multiples. The lighting body is supplied in modules of 1, 2 or 3m, joinable up to the desired length, while the light source is supplied in a maximum length of 6m.
45° Application: Applications at an edge only for COMFORT versions. The aluminium profile must be cut at 45° (please refer to the explanations reported on the instruction sheet).
WIRING
Supply 0.5m cable section type H07RN-F. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: Kg Glow Wire test: --
Lamp included.
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.

Concept

Designed to illuminate facades, walls, corniches and exterior floor marker. Continuous rod may be connected in line allowing a uniform lighting of even very large surfaces with dimming of the light emitted. Continuous lines which tend to infinity, used as a wall washer to illuminate walls with grazing light, or to create light cuts that outline the shapes and the architecture.
Manufacturer Simes
Family Continuous Rod Comfort
Architonic ID 1540239
Order number S.2351W
Year of Launch 2018

Similar Manufacturers

Related Projects

This product has been archived. Product information may no longer be up to date.

Similar Manufacturers

Others have also visited

Similar products to Continuous Rod Comfort Surface 1m