- Rama Garden
- Santa & Cole >
- Gonzalo Milá >
- Architonic ID:
The body of the luminaire, whether single or double, is made in a single piece, without intermediate joints, and is coupled to the column at a right angle, a pure shape even simpler than its predecessor. The body of the luminaire is in aluminium extrusion, recycled and recyclable material, anodized finish.
Materials and finishes
The body of the luminaire has a rectangular cross-section 119x65mm in recycled aluminium extrusion, anodized finish, and the end covers are in aluminium injection with grey painted finish. Internal dissipator in aluminium extrusion black anodized finish. Methacrylate diffuser.
Columns with a height of 3.70 and 5.20 m, circular cross-section tube of Ø 114mm in aluminium extrusion, anodized finish, for 1 or 2 luminaires at the same height.
· Optical unit
Set of PC LEV 1700 optical lenses.
· Electronic equipment
Offers the possibility of powering the lamp from 350 mA to 500 mA.
Adjustable 1-10V or Dali power sources can be supplied as an option.
· Fastening to column
Fastening of the body to the column with three stainless steel screws.
· Installation of the luminaire
The luminaire is delivered assembled.
It is not necessary to open the unit to install the luminaire.
A connector housed in the lower part of the body allows easy installation. Santa & Cole will maintain the guarantee
provided that the body of the luminaire is not opened.
The assembly instructions are enclosed with the street lamp.
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm below the paving.
The foundations must foresee the groove for the electric connection.
The unit is delivered dismantled. The assembly instructions are enclosed with the street lamp.
The template and the anchor bolts are delivered with the column.
This luminaire does not require maintenance.
· Single luminaire
· Double luminaire
· Columns 37.0 / 5.20 m
16 Kg / 21 Kg
Energy Class: A++ / A+ / A
Materials and finishes
Profile with extruded aluminium alignment (6063) in a single piece. Sandblasted finish with anodized protection.
Translucent white polycarbonate sheet.
Element manufactured in gravity flow aluminium alloy (AG3), which allows the body of the luminaire to be fixed and which houses the female connector of the electrical connection.
· Front cover
Access cover of the luminaire located at the front, manufactured with aluminium alloy sheet (6063) to which an EPDM sealing joint is stuck. Removing this cover allows the inner tray to be extracted for maintenance.
Sandblasted finish and anodized protection.
· Inner tray
Extruded aluminium alloy profile (6063), in a single piece which acts as a reflector element, and as a support to fix the lampholder, with electronic equipment and male connector.
Its extraction produces the electrical disconnection of the unit. Anodized protection.
Luminaire of 740 x 190 x 65 mm in anodized finish extruded aluminium, reflector in the same material and diffuser in translucent polycarbonate.
Incorporates electronic equipment for 36 W TC-LEL type compact fluorescent lamp.
The beacon is delivered dismantled in two parts: base and luminaire.
The stainless steel fastening screws are delivered with the beacon.
The assembly instructions are enclosed with the beacon.
Usual spare parts and maintenance for the units.