The luminaire neatly contains the optical and electrical fittings. With high energy efficiency, adjustability and precise light distribution (cut-off), light pollution is significantly reduced. Long lifespan of over 60,000 hours.
The Candela LED comprises three parts: body, variable-length arm and column bracket.
Materials and finishes
Recycled aluminium body with a paint finish. Aluminium injection base and cap with a grey powder coating. Anodised aluminium extrusion heat sink and tempered glass diffuser.
The two standard arm sizes (75 or 150 cm) adjust the distance between luminaire and column, making it easy to adapt to nearby trees.
Extruded aluminium means that the arm can be adjusted to up to 300 cm, at which a point a reinforcing strut is required.
Cylindrical column clamp of 127 mm (compatible with the Rama column family).
Columns of 6.20, 8.20 and 10.20 m high with two circular tube sections measuring Ø 168 mm at the bottom and Ø 127 mm at the top. The columns are made of galvanised steel with a grey paint finish.
LED technology optical unit with light distribution refractors.
Adjustable electronic equipment to power the lamp from 350 mA to 500 mA.
Installation and maintenance
The element is delivered dismantled in four parts: the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws.
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm below the level of the paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.
LED technology minimizes functional maintenance of the luminaire.
This luminaire does not require maintenance.
1 luminaire with medium arm and clamp
6.20 m > 48.5 Kg.
8.20 m > 140 Kg.
10.20 m > 170.5 Kg.
12.20 m > 200 Kg.