PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and architectural improvement.
The system is designed for covering all types of buildings, both new and under restructuring.
The PIZ system can be mounted on any surface (reinforced cement, brick, metal structure, etc.). In case of renovation work, no preliminary activity or cleaning of the support surface is required. Panels are fixed on the surface by means of an anchoring system and of special section bars. Installation requires simple mechanical operations; no skilled workers or special components other than those provided with the system are necessary.
Panels are mounted in a horizontal direction. Vertically, the installation is performed from bottom to top.
Standard arrangements can be accomplished with both heights of insulating Zecca panel; carefully designed alternate patterns of height and width can also be realised.
Specific thermal conductance of the panel:
standard 54 = 0,73 W/m2K
plus 66 = 0,60 W/m2K
H89 = 0,44 W/m2K
Water vapour permeability:
transpiring system with open joints.
Water Vapour Permeability: μ=86
under full water immersion after one hour less than 0,03 Kg/m2
20 Kg/m2 (average weight)
Resistance under wind suction test:
variable from 3300 N/m2 (min) to 6270 N/m2 (max) depending on panel size and type of joint.
in compliance with category I e III ETAG 17.
The system passes the impact soft test (400 Joule) and hard impact test (10 Joule).
Reaction to fire:
Euroclass E (corresponding to former Italian classification class 1 - art. 8 MD 26-06-1984 or French classification M1)
The PIZ panel is available in the following sizes with 0 mm or 15 mm joint
COLOURS AND FINISHES:
Thanks to the wide range of colours and finishes, it is always possible to identify the best solution for a building to meet the customer’s specific needs. Eight basic colours (plus white) are available in 5 shades, generating a palette of 40 colours. Four finishes are provided: smooth, rough, granular and grooved.