The fixture provides mainly direct downward illumination. The shade is lit up from within and creates a soft diffuse upwards light. Depending on the choice of reflector, the downward lighting characteristics will vary. The reflector types have been designed in different variations to provide either asymmetrical or symmetrical distributions of light.
Aluminium coloured with textured surface, powder coated.
Shade: High pressure moulded white opal acrylic. Reflector: Metallized, high pressure moulded polycarbonate. Diffuser LED: Toughened clear glass with silk screen print. Housing: Die cast aluminium.
LED: Fitting/pipe stub dimensions: Ø 48mm min. 100mm or wire suspension. Installation cable: Side-mounted and top-mounted version: 9m, 5x1,5mm² (Class I) or 9m, 4x1,5mm² (Class II). Top-mounted: For 3/4” pipe thread min. 34 mm. Wire-mounted version: No cable, but approved for looping max 3x1,5mm² via IP68 connectors. Driver position: In fixture head. Pole and suspension to be ordered separately. HIT: Fitting/pipe stub dimensions: Ø 48mm min. 100mm or wire suspension. Installation cable: Sidemounted version: 9m, 3x1,5mm² (Class I) or 9m, 2x1,5mm² (Class II). Top-mounted version: No cable. Terminal block: 1x3x2.5mm². Top-mounted: for 3/4” pipe thread min. 34 mm. Ballast positioning: In fixture head. Looping: Approved in top-mounted variant, max 3x1,5mm². Pole and suspension to be ordered separately.
Min: 8.83 kg. Max: 13.22 kg.
Ingress protection IP66. Electric shock protection I w. ground, II w/o ground. IK06.
LED: Round symmetric version: Dimmable 1-10V/PWM. Rotation symmetrical and asymmetrical version: Dimmable 1-10V. For the asymmetric version the light distribution can be changed by moving the reflector. HIT: It is possible to rotate the reflector. The fittings can be delivered with a shading louvre on request. The fittings can also be delivered with bottom glass in clear, silk screen or matt glass. Light distribution can be changed by moving the light source. HIT/HIE: To achieve optimum asymmetrical light distribution, tubular light sources (HIT) are recommended. For the HIE/HIT versions it is also possible to use HSE/HST light sources. All versions are also available for a Ø60mm stub on request. For LED replacement kit please do contact Louis Poulsen. The innovation of the LED technology is constant. The specifications mentioned are based on present technology. Please find updated info on products on our website www.louispoulsen.com.