Key facts

Product:
Pebble
Family:
Pebble
Manufacturer:
Living Divani >
Architonic ID:
1545372
Country:
Italy
Launched:
2018
Manufacturer groups :
Storage-Dressing tables >
Groups:
Storage-Dressing tables >

Product description

Writing desk/Vanity, available with or without mirror, with monoblock top composed of a bevelled top in MDF lacquered matt black or covered in leather, in mirror glass or marble (white Carrara, black Marquinia and red Levanto); the marble version provides a satin finish and an opaque transparent protective varnish or a matt or glossy polyester finish. For the versions with lacquered top, top in mirrored glass or in marble, the
lower edge of the top in MDF is always covered in black Caresse leather. For the sole version with top covered in leather, the covering of the lower edge and the one of mirror is always done in the same leather of the top (typology and colour). For all versions, bottom in matt black lacquered MDF to which are fixed centering plates, with conical pilot-hole, for fixing the base. Tubular steel base Ø20 mm, with 25x6 mm section joining crosspieces, lacquered with epoxy powder coating gunmetal grey colour. All top versions are fixed to the base by tie rods; floor support secured by black PVC feet.
Rotating mirror, contoured according to design and glued on a MDF panel covered in black leather, fixed to a pivot-joint bonded to a Ø20 mm tubular steel, inserted in the top.
Drawer unit with three open compartments, in matt black lacquered MDF, fixed to a Ø20 mm steel round support lacquered with epoxy powder coating gunmetal grey colour, with lower-end that slots through a contoured recess in the steel crosspieces, while the upper-end insets with conical pilot hole in the bottom of the top.
Removable drawers always covered in black Caresse leather.

Product family

Concept

Writing desk / Vanity, available with or without mirror, with monobloc top composed of a bevelled top in MDF lacquered matt black or covered in leather, in mirror glass or marble; lower edge in MDF covered in leather or lacquered matt black; bottom in matt black lacquered MDF to which are attached centering plates, with conical pilot-hole, for fixing the base. Tubular steel base Ø20 mm, with 25x6mm section joining crosspieces, lacquered with epoxy powder coating gunmetal grey colour. All top versions are fixed to the base by tie rods, and floor support secured by black PVC feet. Rotating mirror, contoured according to design and glued on a MDF panel covered in leather, fixed to a pivot-joint supported by a Ø20mm tubular steel, inserted in the top. Drawer unit with three open compartments, in matt black lacquered MDF, fixed to a Ø20mm steel round support lacquered with epoxy powder coating gunmetal grey colour, with lower-end part that slots in a contoured recess on the steel.