other. They are fixed together on the upper part, while on the lower part they are fixed through a special cast aluminium base (dimensions 170xh
65 mm). The base consists of two elements fixed by a M8 screw. On the upper part there are three steel EN10111DD1 support brackets, T.
30/10, for the bin-liner holder, which consists of a steel EN10111DD1 curved fascia, T. 20/10, Ø 400 mm. The cover (dimensions Ø 440xH
50 mm) is made of a steel pressed sheet plate, T. 10/10, with a central opening, Ø 260 mm, and it is fixed to the bearing structure through a
strong hinge welded on the two elements, T. 30/10.
On the cast aluminium base there are three holes, Ø 12 mm, for ground fixing with appropriate bolts.
All the elements in aluminium are cold galvanised and polyester powder coated.
Dimensions: H=915 mm
Superior Ø=440 mm
Ø base=170 mm
Capacity 110 Lt