The door and the back in steel EN10111DD11, T. 20/10, are reinforced on the extremities by strong profiles, T. 30/10, furthermore, there are two borders 10 mm high and 5 mm wide, at a distance of 200 mm from the upper part and 200 mm from the lower one in order to strengthen the elements. In the inner side of the door and of the bin back there are two strong squared tube bars, 15x15 mm and T. 2 mm, in order to make the bin even stronger.
The door is provided with a spring lock with a triangular key. The internal bin-liner holder is in galvanised steel, T. 30/10. in order to facilitate the substitution of the sack, the bin-liner holder runs out of 100 mm thanks to two guides made with laser cutting.
Both sides of the bin are in steel EN10111DD11, T. 15/10 and curved: on the right side it is welded a steel plate, T. 15/10, with an inclination of 45 degrees and finally polished, while on the left one it is fixed a plate provided with a pierced sheet plate (diameter of the holes 5 mm), which has a central hole with a 20 mm diameter and other three openings with the same diameter but placed at a 90 degrees distance one from the other.
Inside the bin, on the bearing structure there is a support in order to place a cylindrical container made of galvanised steel, T. 10/10, to drop the cigarette butts in. This container is then placed under the opening on the left side.
All the elements (except from those galvanised) are finally hot galvanised and polyester powder coated.
All fixings are in galvanised steel EN10346DX51D+Z.
H = 1200 mm
Width = 630 mm
Depth = 355 mm
Capacity 110 Lt