Division | Stainless steel letterbox Division BIG - RAL as desired - Comelit Switch VIDEO complete set Wifi - 2-wire flush-mounted variant 100mm

Mailboxes from Briefkasten Manufaktur

Product description

Stainless steel letterbox Division BIG - RAL of your choice - Comelit Switch VIDEO complete set Wifi - 2-wire With its solid 10mm design panel, the letterbox Division is a top-class model among letterboxes. The 2mm front panels made of stainless steel V2A 1.4301 in the colour of your choice are mounted on a 5mm stainless steel frame and therefore stand out slightly from the house wall. Characterised by the idea of sustainability, this letterbox was developed on the basis of the Designer collection with exchangeable panels. All panels can be replaced at any time, whether a new video intercom system, a new house number or a change of lettering, all panels can be easily exchanged. The Division BIG model has a newspaper insertion flap for newspapers, magazines and book mail. Integrated Comelit VIDEO complete set Wifi. The Comelit video intercom is an innovative solution with features such as facial recognition, voice commands and operation via app with your smartphone. Completely pre-programmed for easy installation - connect 2 wires and DONE! A real eye-catcher among letterboxes. Clear lines and no-frills design are the hallmarks of the Division letterbox. Our products have a high quality, reliable functionality and their own identity. Made by Briefkasten Manufaktur. Letterbox made of stainless steel V2A 1.4301, 2mm front panels + 5mm frame powder-coated in RAL of your choice. Optionally also available as surface-mounted variant with surface-mounted box in stainless steel, 240 grain polished. Frontal post removal door 350 mm x 300 mm, to be opened from top to bottom. Incl. 2 keys with key number. Mail slot from the front, dimensions of slot: W 35 cm x H 6.3 cm, C4 landscape. Very large letters fit in here without bending. Attention: No removal protection! 8-12V DC short-stroke bell push button with LED ring lighting (blue, white, red or green). The illumination of the bell push buttons cannot be supplied via the control unit. It must be connected to an additional 8-12 V DC power supply. Optionally replaceable nameplate made of stainless steel with laser inscription or nameplate made of Plexi. Optionally with house number approx. 50-70mm high (height depends on number of characters) and inscription 10-70mm (height depends on number of characters) backed with stainless steel, polished or backlit in white incl. EVN LED power supply unit / transformer IP65 12V/DC 0.1?4W for LED illumination of the house number. An 8-12V DC short-stroke light switch with pictogram is optionally available. Dimensions of flush-mounted or surface-mounted box: H 710 mm x W 410 x D 100 | 150 mm. Flush-mounted box with pre-punched cable inlets and fixing points on all sides. Surface-mounted box for wall mounting with perforation on the back, surface-mounted box for fence mounting without perforation (must be done on site). ATTENTION: The front panel of the surface-mounted box also protrudes by 2 cm. Plaster box made of galvanised steel. Surface-mounted box made of stainless steel V2A, polished on all sides without visible screw connection. Plaster box with pre-punched cable inlets on all sides. Important information Camera or intercom preparation The intercom systems must be connected by an electrician. Contact your trusted electrician for planning, installation and wiring. Water protection To achieve optimum water protection for your mail, the letterbox or letterbox system should, if possible, be located under a canopy. Mail is only protected from water if it is completely inserted in the box and the insertion flap is closed. Mail that is not completely inserted allows moisture and dirt to penetrate the letterbox. It is therefore necessary to plan sufficiently dimensioned letterboxes for the upcoming demand. This system is protected against water ingress in accordance with DIN EN 13724. Water ingress is not a reason for complaint.

Concept

With its solid 10mm design panel, the Division letterbox is a top-class model among letterboxes. The front panels made of stainless steel V2A 1.4301 in the colour of your choice are mounted on a 5mm stainless steel frame and therefore stand out slightly from the house wall. Characterised by the idea of sustainability, this letterbox was developed on the basis of the Designer collection with exchangeable panels. All panels can be replaced at any time, whether a new video intercom system, a new house number or a change of lettering, all panels can be easily exchanged. The Division BIG model has a newspaper flap for newspapers, magazines and book mail.
Manufacturer Briefkasten Manufaktur
Family Division
Architonic ID 20280600
Order number 515BDI-VAR-KSCSSW-UP100
Year of Launch 2022

More products from Division family

Downloads

Manufacturer’s Catalogues

See all Briefkasten Manufaktur's catalogues

Get more information

I would like to receive

Tell the brand about what topic you would like to know by selecting at least one of the options above.

Briefkasten Manufaktur representatives will respond to you via e-mail. By sending this message, you agree to our Terms & Conditions.

Division | Stainless steel letterbox Division BIG - RAL as desired - Comelit Switch VIDEO complete set Wifi - 2-wire flush-mounted variant 100mm | Mailboxes | Briefkasten Manufaktur

Division | Stainless steel letterbox Division BIG - RAL as desired - Comelit Switch VIDEO complete set Wifi - 2-wire flush-mounted variant 100mm

Briefkasten Manufaktur

Others have also visited

Similar products to Division | Stainless steel letterbox Division BIG - RAL as desired - Comelit Switch VIDEO complete set Wifi - 2-wire flush-mounted variant 100mm

More products from Briefkasten Manufaktur