Molla

Light fixture with 2 combined light beams: the large one with lighting function and the narrow one with decorative function. Wall installation. The fixture can be installed with the main beam pointed either downwards or upwards according to the kind of lighting desired (direct or indirect). The large beam is obtained by the combination of a monochromatic LED light source with a reflector. The narrow beam is obtained by the combination of a monochromatic LED light source with a high-performance projector. Available in two finishes: light grey painted and anthracite grey painted.

Composed by lighting cap unit and terminal board fixed together by means of locking screws. Cap and terminal board in die-cast EN AB-47100 aluminium. Watertight gasket in silicone rubber. Electronic ballast integrated in the fixture. Projector composed by a body in reinforced polymer and PMMA lenses. Tempered and silkscreened light-diffusing glasses, siliconed flush with the lighting cap. Power connection to the mains to be carried out outside the fixture, without need of opening it, by means of a pre-installed IP65 connection device suitable for cables with a diameter between 6 and 13 mm. Wall fixing by means of a bracket in folded steel sheet to which the fixture is fastened with two screws. Locking screws used outside the fixture in AISI 316 stainless steel. Die-cast aluminium and bracket painted with 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.

Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class II.