Key facts

Ciclope recessed
Artemide Architectural >
Alessandro Pedretti >, Studio Rota & Partner >
Architonic ID:
Manufacturer groups :
Outdoor lighting-Outdoor wall lights >
Outdoor lig...-Outdoor recessed wall lights >
Outdoor lighting-Outdoor wall lights >
Outdoor lig...-Outdoor recessed wall lights >

Product description

Lighting unit composed by: frame in reinforced polymer; diffuser in light-diffusing polycarbonate; plate in pickled, machined and galvanized steel; watertight gasket in silicone rubber; LED circuit; electronic ballast; riflettore in alluminio tornito in lastra e verniciato PG13.5 cable gland, H05RN-F cable and IP65 electrical connection device suitable for cables with a diameter between 6 and 8.5 mm and allowing the electrical interfacing with the external mains without need of opening the fixture. The lighting unit houses the electrical components and sources. Aesthetic cover in die-cast EN AB-47100 aluminium painted by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.

Recessing box in reinforced polymer, can be ordered separately. The elements are fixed together by means of screws. All the locking screws used outside the fixture and inside the stem are in AISI 304 stainless steel.
Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class II.

Product variants

Product family


Lighting system with diffuse unilateral or bilateral emission, with high-performance LED light sources. Light emission is obtained by the combination of six monochromatic LED light sources, a reflector and an opaline diffuser. Floor, wall or recessed installation. Available in two finishes: light grey painted and rust painted.