SVL Panels

S|V|L- Panels

S|V|L- Panels are being used where design and appearance is the goal and shear strength is not required. They are available as good 1 side, i.e. with S|V|L- veneer on the face and different veneer as a backer or as good 2 sides with S|V|L- veneer on both faces.

The veneer thickness is about 2.2 mm and the S|V|L- veneer is puttied and sanded.

We also offer fire rated panels in accordance with the corresponding standards of the country/state. The emission of formaldehyde has been measured as being better than E1 (less than 0.1 ppm) and is also in compliance with strictest limitations.

S|V|L- panels- let your ideas become reality!

General

with an approx. 2.0 mm SVL veneer on MDF core

Wood Species

Douglas Fir (Oregon Pine) (lat. Pseudotsuga Menziesii)

Lamination

General interior design (D3), with the exception of water- proof panels

Use

General interior design (not load bearing or statical loaded components)

Available Sizes

19 x 2440 x 1220 mm

30 x 2440 x 1220 mm

42 x 2440 x 1220 mm

19 x 3050 x 1220 mm

30 x 3050 x 1220 mm

42 x 3050 x 1220 mm

14 x 2440 x 1220 mm waterproof

Processing

With regular woodworking tools