KTribe Floor 2

KTribe F1:

Floor lamp providing diffused lighting; a switch located near the diffuser allows for 4-level light adjustment via a “remote” dimmer positioned on the power cord near the plug.

Base and rod support in die-cast, polished and chrome-plated Zamak alloy. Rod, arm support, arm and diffuser support in polished aluminum tube. Molded steel counterweight with galvanized finish. Injection-molded PC (polycarbonate) inner diffuser opal color.

Outer diffusers in transparent or fumèe PMMA (polymethylmethacrylate) and silver or bronze on the inner surface, by vacuum aluminum coating.

Injectionmolded PC (polycarbonate) upper ring, completely transparent, or transparent brown for the outer bronze diffuser.

KTribe F1 soft:

Floor lamp providing diffused lighting; a switch located near the diffuser allows for 4-level light adjustment via a “remote” dimmer positioned on the power cord near the plug.

Base and rod support in die-cast, polished and chrome-plated Zamak alloy. Rod, arm support, arm and diffuser support in polished aluminum tube. Molded steel counterweight with galvanized finish.

Injectionmolded PC (polycarbonate) inner diffuser opal color. Outer diffuser in plissé cloth.

Injectionmolded PC (polycarbonate) upper ring, completely transparent.

On the cable there is the electronic dimmer which allows the regulation of light brightness.

KTribe F2 / KTribe F3:

Floor lamp providing diffused lighting.

Base, rod support and diffuser support in die-cast, polished and chrome-plated Zamak alloy. Galvanized P04 steel base cover.

Injectionmolded PC (polycarbonate) opal inner diffuser and support for the lamp-holder. Outer diffusers in transparent or fumèe PMMA (polymethylmethacrylate), and silver or bronze on the inner surface, by vacuum aluminum coating.

Injection-molded PC (polycarbonate) upper ring, completely transparent or transparent diffuser and silver diffuser) or transparent brown for the outer bronze diffuser.

On the cable there is the electronic dimmer which allows the regulation of light brightness.

KTribe F2 soft / KTribe F3 soft:

Floor lamp providing diffused lighting.

Base, rod support and diffuser support in die-cast, polished and chrome-plated Zamak alloy. Galvanized P04 steel base cover.

Injectionmolded PC (polycarbonate) opal inner diffuser and support for the lamp-holder. Outer diffuser in plissé cloth. Injection-molded PC (polycarbonate) upper ring, completely transparent.

On the cable there is the electronic dimmer which allows the regulation of light brightness.

KTribe S1:

Suspension lamp providing diffused light.

PC (polycarbonate) inner diffuser, with opal white finish. Outer diffuser available in finishes: fumèe, made in PMMA (polymethylmethacrylate) or silver, made by vacuum aluminum coating on the inner surface.

Single support cable. White ceiling rose.

KTribe S2 / KTribe S3:

Suspension lamp providing diffused light.

PC (polycarbonate) inner diffuser, with opal white finish. Outer diffusers in transparent or fumèe PMMA (polymethylmethacrylate), and silver or bronze on the inner surface, by vacuum aluminum coating.

Three stainless steel cables, length 4000 mm for suspension of the diffuser assembly. White ceiling rose.

KTribe T1:

Table luminaire providing diffused lighting.

Base, rod support and diffuser support in die-cast, polished Zamak alloy. Polished aluminum tubular. Injection-molded, matte black PA (Nylon) base cover.

Injection-molded PC (polycarbonate) opal inner diffuser. Outer diffuser in transparent or fumée PMMA (polymethylmethacrylate).

KTribe T1 glass:

Table luminaire providing diffused lighting.

Base, rod support and diffuser support in die-cast, polished Zamak alloy. Polished aluminum tubular. Injection-molded, matte black PA (Nylon) base cover.

Injection-molded PC (polycarbonate) opal inner diffuser. Outer diffuser in transparent glass

KTribe T2:

Table luminaire providing diffused lighting.

Base, rod support and diffuser support in diecast, polished and chrome-plated Zamak alloy. Base cover in black injection-molded PA (Nylon).

Injection-molded PC (polycarbonate) opal inner diffuser. Outer diffusers in transparent or fumèe PMMA (polymethylmethacrylate), and silver or bronze on the inner surface, by vacuum aluminum coating. Injectionmolded PC (polycarbonate) upper ring, completely transparent or transparent diffuser and silver diffuser) or transparent brown for the outer bronze diffuser.

KTribe T2 soft:

Table luminaire providing diffused lighting.

Base, rod support and diffuser support in die-cast, polished Zamak alloy. Base cover in black injection-molded PA (Nylon).

Injection-molded PC (polycarbonate) opal inner diffuser. Outer diffuser in plissé cloth. Injection-molded PC (polycarbonate) upper ring, completely transparent.

On the cable there is the electronic dimmer which allows the regulation of light brightness.

KTribe W:

Wall mounted fixture providing diffused lighting; a switch located near the diffuser allows for 4-level light adjustment via a “remote” dimmer.

Cover rose in die-cast, polished and chrome-plated Zamak alloy. Arm and diffuser support in polished aluminum tube.

Injectionmolded PC (polycarbonate) inner diffuser opal color. Outer diffusers in transparent or fumèe PMMA (polymethylmethacrylate) and silver or bronze on the inner surface, by vacuum aluminum coating. Injection-molded PC (polycarbonate) upper ring, completely transparent, or transparent brown for the outer bronze diffuser.

KTribe W soft:

Wall mounted fixture providing diffused lighting; a switch located near the diffuser allows for 4- level light adjustment via a “remote” dimmer.

Cover rose in die-cast, polished and chromeplated Zamak alloy. Arm and diffuser support in polished aluminum tube.

Injection-molded PC (polycarbonate) inner diffuser opal color. Outer diffuser in plissé cloth. Injection-molded PC (polycarbonate) upper ring, completely transparent.