Triple 3x Dimmer Switch

Antique Brass 35023

We’ve engineered this triple 3x dimmer switch to be as sleek as possible.

The front plate is just 1.5mm thick and sits flush to the wall. It attaches to the back plate using clips for a screwless look.

There’s also a collar underneath each rotating knob to hide all the working parts.

The plate, knobs and collars are all made from solid brass (rather than plastic wrapped in metal) to create perfectly crisp edges. We then hand-age them for an antique look.

Used with a suitable bulb, our dimmers won’t flicker or buzz. You can also set the minimum bulb brightness.

Antique brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it, causing it to darken (especially in the areas you touch most). We’ve given it a head start by ageing it by hand, so it has that antique look right out the box.

Suitable for trailing or leading edge modes

Must be installed with Corston back boxes

You'll also need our 9mm render trim for brick walls or 3mm plaster trim for skimmed plasterboard

Use our precisely sized brick or plasterboard hole saw for easy installation

- Dimensions: H80mm x W222mm x D26mm. The Knob protrudes 16mm from the plate.

- Switches rated to 16A

- 230-250V~50Hz

- Complies with IEC 60669-1

- The switch plate sits 1.5mm from the wall

- Secured with a metal ring without visible tool marksh_