Double 4x Vertical Toggle Switch

Antique Brass 39758

We’ve engineered this double 4x vertical toggle switch to be as sleek as possible.

The antique brass-finished front plate is just 1.5mm thick and sits flush to the wall. It attaches to the back plate using clips for a screwless look.

Use a two-way switch where you want to simply turn a circuit on and off. You can have up to two of these on one circuit. To control the circuit from three or more places, add an intermediate switch.

Antique brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it, causing it to darken (especially in the areas you touch most). We’ve given it a head start by ageing it by hand, so it has that antique look right out the box.

Made from solid brass

Streamlined toggle with a satisfying click

Must be installed with Corston back boxes

You'll also need our 9mm render trim for brick walls or 3mm plaster trim for skimmed plasterboard

Use our precisely sized brick or plasterboard hole saw for easy installation

- Dimensions: H151mm x W80mm x D23mm. The toggle length is 15mm.

- Switches rated to 16A

- 230-250V~50Hz

- Complies with IEC 60669-1

- The switch plate sits 1.5mm from the wall

- Secured with a metal ring without visible tool marksh_