Triple 3x Vertical Rocker Switch

Bronze Black 37780

We’ve engineered this triple 3x vertical rocker switch to be as sleek as possible.

The front plate is just 1.5mm thick and sits flush to the wall. It attaches to the back plate using clips for a screwless look.

The plate and rockers are also made from solid brass (rather than plastic wrapped in metal) to create perfectly crisp edges, and finished in bronze.

Use two-way switches where you want to simply turn a circuit on and off. You can have up to two of these on one circuit. To control the circuit from three or more places, add an intermediate switch.

Bronze is our boldest finish, but it isn’t shiny or bright, so it has a subtle side to it too. It’s a deep matt brown colour that’s almost black in some lights.

Engineered for a satisfying click

Must be installed with Corston back boxes

You'll also need our 9mm render trim for brick walls or 3mm plaster trim for skimmed plasterboard

Use our precisely sized brick or plasterboard hole saw for easy installation

- Dimensions: H222mm x W80mm x D32mm. The Rocker sits 6mm from the plate

- Switches rated to 16A

- 230-250V~50Hz

- Complies with IEC 60669-1

- The switch plate sits 1.5mm from the wall

- Secured with a metal ring without visible tool marksh_