Continuous Rod Minimal Recessed 1m

CONTINUOUS ROD MINIMAL RECESSED

Art. S.2321W

MODULES LED 3000K 24V CRI 90

Rated luminaire luminous flux: 800lm

Rated input power: 11.5W

Luminaire efficacy: 70lm/W

Without trasformer

CE

CONTINUOUS ROD MINIMAL RECESSED

Art. S.2312W

MODULES LED 3000K 24V CRI 90

Rated luminaire luminous flux: 1600lm

Rated input power: 23W

Luminaire efficacy: 70lm/W

Without trasformer

CE

CONTINUOUS ROD MINIMAL RECESSED

Art. S.2313W

MODULES LED 3000K 24V CRI 90

Rated luminaire luminous flux: 2400lm

Rated input power: 34.5W

Luminaire efficacy: 70lm/W

Without trasformer

CE

PRODUCT TYPE

Wall mounted luminaire. IP rating IP 67

MATERIAL CHARACTERISTICS

Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion

resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 caps for the extruded parts. Mechanical resistance IK 08 Maximum load capacity --

LIGHTING PERFORMANCE

Continuous light source made of opal silicone. Lamp fixed position. LOR --

INSTALLATION AND MANTEINANCE

Cuttable sections of 5cm: The light source and the aluminium profile of CONTINUOUS ROD can be easily sectioned. The circuitry length may be reduced to sections of 5cm and multiples. The lighting body is supplied in modules of 1, 2 or 3m, joinable up to the desired length, while the light source is supplied in a maximum length of 6m.

45° Application: Applications at an edge only for COMFORT versions. The aluminium profile must be cut at 45° (please refer to the explanations reported on the instruction sheet).

WIRING

Supply 0.5m cable section type H07RN-F. Isolation: CLASS III. Available colours: White (cod.01), Aluminium grey (cod.14). Weight: Kg Glow Wire test: --

Lamp included.

This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).

LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.