1G Two Way Dimmer Switch - Paintable

Paintable Antique Brass 12421

We’ve engineered this single two-way rotary dimmer switch to be as sleek as possible.

The front plate is just 1.5mm thick and sits flush to the wall. We’ve finished it with etched primer that can be coated in the same paint as your walls for a seamless look that blends right in.

Used with a suitable bulb, our dimmers won’t flicker or buzz. You can also set the minimum bulb brightness.

The subtle solid brass switch detailing is finished in Antique Brass. Antique Brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it, causing it to darken (especially in the areas you touch it most). We’ve given it a head start by ageing it by hand, so it has that antique look right out the box.

Anti-flickering/buzzing

Suitable for trailing or leading edge modes

Made from solid brass

Etched primer allows paint to adhere well for a seamless custom finish

Screwless design

Use with our metal or recycled plastic single back boxes

- Dimensions: H86mm x W86mm x D42mm; dimmer knob height 20mm

- Switches rated to 20A

- Built-in thermal and short circuit protection

- Trailing or leading edge dimming control. Trailing edge is the default setting and is recommended to prolong LED bulb life

- Soft start operation to protect bulb

- Complies with BSEN60669-1

- 230-250V~50Hz

- The switch plate sits 1.5mm from the wall

- Metal die-cast chassis