Universal MF 1300-50 W 2S R

Open fireplaces from Metalfire

Product description

Concept

These traditional wood-fired open fireplaces are chosen for their aesthetic impact in the room, the large dimensions, the minimalistic construction of their parts, and the fact that they can be made entirely to measure. This means that there are endless possibilities for dimensions, style and finish. For houses built according to the latest building regulations, an additional flue gas fan and electrically operated sealable valves make this combination perfectly possible and safe.

UNIVERSAL
• traditional open fireplace system with vertically sliding spark screen in fine metal mesh
• traditional combustion system with fresh air connection
• collection with components made for the traditional masonry fireplace, flue with closable gas valve, ashpan with grate, cast iron interior finish, sliding spark screen
• components can also be supplied as a whole/appliance, for simpler installation on-site, and as a safe and aesthetic alternative to a masonry fireplace
• optional convection system with convection chamber
• not ambient-air independent
• direct connection to fresh air supply is recommended
• suitable for:
• refurbishments/renovations
• new-build houses, ventilation type A/B/C
• new-build houses with ventilation type D (balanced ventilation), if using the optional flue gas fan and ventilation fan, and any additional optional electric gas valve and air valve(s)
• not suitable for passive houses.



Universal open wood-fired fireplace

Supplies
1. fresh air supply via concentric flue system

2. supply of ambient air/convection air

3. primary air supply/combustion air

4. flue gas discharge

5. emission of heated convection air/recovered heat

Characteristics
A. combustion chamber with ORIGINAL finish (vertical ribbed cast iron slats). The DESIGN finish is also available.

B. bottom plate in 10 mm flat steel with ashpan and cast iron grate

C. manually operated handle for closing the flue gas valve and ventilation valves

D. adjustable flue gas baffle plates

E. sliding spark screen

F. optional convection chamber for outflow of hot air
G. optional finishing frame in 10mm solid steel

Spark screen
Using the folded-back edge, the spark screen can easily be moved up and down manually. The spark screen is designed to prevent sparks and incandescent particles from reaching the floor.

Removable handle
This is supplied as standard for setting the combustion air supply and the flue gas valve. The reverse side of the handle can also be used for moving the grates. This is necessary when emptying the ashpan, which must be done regularly to maintain an optimal supply of combustion air.

Grate + ashpan
The cast iron grate is particularly attractive, and creates a real “fireplace look”. The slots in the grate allow ash to fall into the ashpan. The ashpan itself can be easily cleaned by removing the grate and vacuuming the ashes using an ash vacuum cleaner. Alternatively, the ashpan can be removed from the fireplace for cleaning in another way.

Fire fret
Universal models are fitted as standard with a fire fret. This ensures that coals or burning wood stay well within the fire when used with an open door.

Fuel: Wood
To obtain optimal combustion, the moisture content of the wood should be no more than 15% If this is not the case, the glass will quickly become soiled and appliance will be less efficient. To achieve this moisture content, the wood must be dried for two to three years in a dry well-ventilated place. The most suitable wood types are beech, oak and birch. Each of our fireplaces has an ooptimal wood load: for Universal models this is a maximum of four 30 cm logs. Lay the logs alongside each other in the fireplace. The use of resinous wood types, chipboard, laminate, treated wood or accelerants is strongly discouraged, as it produces sparks and a short burning time. It also harms your fireplace and the environment.


Interior finishing

Original | Design
Vertical ribbed cast iron slats (20mm)
Asymmetrical steel slats (10mm)

Premium finish
As well as our standard black lacquered finish, Metalfire offers a number of bronze finishes (on application).

MADE-TO-MEASURE
Alongside its fireplace collection, Metalfire also specialises in additional MADE-TO-MEASURE solutions, finishing frames, concepts, floor plates, wood storage, etc. These items are manufactured to the design of the customer/architect/interior designer.

The technical department will submit the production plan to the customer for approval, and will then create these unique pieces through the skilled hands of the craftsmen in our workshop. This gives the products a unique appeal which simply can’t be achieved by automated production processes.

More about this product

Part of the collection OPEN WOOD FIREPLACES.
Manufacturer Metalfire
Family Universal
Architonic ID 1276784
Year of Launch 2004

Similar Manufacturers

Related Projects

This product has been discontinued and archived. Product information may no longer be up to date.

Similar Manufacturers

Similar products to Universal MF 1300-50 W 2S R