Tape by LAB23



Designer Studio Orange
Architonic id 1151432

Send page
Print page
Save page
TAPE consists of two posts, whose central part is 670 mm high made of a stainless steel AISI304 tube bar, D. 75 mm, thickness 2 mm. while the upper sections (H. 110) and lower sections (H. 220) are in galvanised and polyester powder coated steel tubes, d. 80 mm, thickness 2 mm.
The tubes with different diameters are fixed together mechanically with bolts. Three galvanised and polyester powder coated steel fascias, T. 40/10 and H. 150 mm, are fixed between one post and the other with appropriate bolts in the central part of the stainless steel AISI 304 tube. At the ends of the fascias there are two folds with a radius of 35 mm.
There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.

H= 1000 mm
Width= 1450 mm

More More
Similar products