S|V|L - Panels
S|V|L - Panels are being used where design and appearance is the goal and shear strength is not required. They are available as good 1 side, i.e. with S|V|L - veneer on the face and different veneer as a backer or as good 2 sides with S|V|L - veneer on both faces.
The veneer thickness is about 2.2 mm and the S|V|L - veneer is puttied and sanded.
We also offer fire rated panels in accordance with the corresponding standards of the country/state. The emission of formaldehyde has been measured as being better than E1 (less than 0.1 ppm) and is also in compliance with strictest limitations.
S|V|L - panels - let your ideas become reality!
with an approx. 2.0 mm SVL veneer on MDF core
Douglas Fir (Oregon Pine) (lat. Pseudotsuga Menziesii)
General interior design (D3), with the exception of water- proof panels
General interior design (not load bearing or statical loaded components)
19 x 2440 x 1220 mm
30 x 2440 x 1220 mm
42 x 2440 x 1220 mm
19 x 3050 x 1220 mm
30 x 3050 x 1220 mm
42 x 3050 x 1220 mm
14 x 2440 x 1220 mm waterproof
With regular woodworking tools