Stripe by LAB23



Designer Studio Orange
Architonic id 1151428

Send page
Print page
Save page
STRIPE consists of two galvanised and polyester powder coated steel tubes 80x2 mm, with four decorative millings on the upper part, height 5 mm. On the top of each post, 6 semi-circular laser cut shaped elements are fixed, 60x40 mm, thickness 5 mm, with a hole, diameter 5 mm, 23 mm apart. They are welded in pairs at a distance of 300 mm one from the other. On the left-hand pole the first and the third element are welded in a vertical position and the second one in an horizontal position, while on the right-hand bar they are welded the opposite way.
These elements are used to fix the steel EN10111DD11 bars, 1300x80 mm and 4 mm thick, which are bent to 90 degrees. There is a flange with four M10 holes welded to the bottom of the bollard for ground fixing with appropriate bolts. The in-ground version is supplied with a 250 mm extension under the flange, which has no holes.

H = 1000 mm
Width= 1480 mm
Dflange= 230 mm

More More
Similar products