Somma by LAB23



Designer Hangar Design Group
Architonic id 1151419

Send page
Print page
Save page
The solid structure of the SOMMA seat is made of galvanised and polyester powder coated steel, thickness 60/10 and it is constructed linking together two bearing elements, welded through a continuous wire welding and reinforced by 8 elements, 60/10 thick.
The upper part of the seat is made of solid exotic wood treated with natural waterproof oils, (1200x1200 mm). At the centre of the seat there is an x-shaped opening, Dimensions 1200x1200 mm, allows to the bearing structure to come out of 30 mm, thus delimiting the four sections of the seat.
The seat is fixed to the bearing structure with hexagonal M8 screws screwed on specific bearings anchored to the wood through 12 plates, T. 60/10, welded to the bearing structure.

At the bottom of the metal structure there are four elements with M10 holes for the ground fixing thanks to appropriate bolts.

Maximum dimensions:
H = 450 mm
Length = 1200 mm
Depth = 1200 mm

All fixings are in stainless steel AISI304

More More
Similar products