Designer
Alfred Homann, Ole V. Kjær
Year
1980
Architonic id
1033697
The rings ensure that stray light is controlled and direct a small amount of light onto the topside of the shade for self-illumination.
More
-
Nyhavn Pendant creates general illumination, mainly directed downwards by the conical shade.
Finish: Copper, brushed and coated. White, wet painted.
Material: Shades: Spun aluminium or spun copper. Enclosure: Clear glass. Top: Spun aluminium or spun copper.
Mounting: Suspension type: Cable 3x0,75mm². Canopy: Yes. Cable length: 3m.
Weight: Max. 3.5kg.
Class: Ingress protection IP20. Electric shock protection I w. ground. F-mark: Yes.
More
Nyhavn Pendant
Year
1980
Architonic id 1033697
-
Nyhavn Park creates a symmetrical and even lighting, mainly directed downwards by the conical shade.
Finish: Aluminium coloured with textured surface, powder coated.
Material: Shade: Spun aluminium. Enclosure: Light grey, injection moulded polycarbonate or injection moulded white opal polycarbonate. Rings: Die cast aluminium. Top: Die cast aluminium.
Mounting: Fitting/pipe stub dimensions: Ø 42x65mm. Installation cable: 6m, 2x1mm² or 6m, 3x1mm². Terminal block: 1x3x2.5mm². Terminal block positioning: In fixture head. Ballast: Yes (only Electric shock protection I). Ballast positioning: In fixturehead (Only Electric shock protection I).
Weight: Max. 11.5kg.
Class: Ingress protection IP44. Electric shock protection I w. ground, II w/o ground. F-mark: Yes.
Info notes: The control gear for class I versions is placed in the fixture head. For class II incandescent and vapour lamp versions, note that control gear for these versions is not supplied as standard and must be ordered separately (semi-parallel ballast/ignitor and capacity) and placed in the pole. The class I vapour lamp versions are phase-compensated.
More
Nyhavn Park Post
Architonic id 1033714
-
Nyhavn Wall creates general lighting, mainly directed downwards by the conical shade.
Finish: Copper, brushed. White, wet painted.
Material: Shades: Spun aluminium or spun copper. Enclosure: Clear glass or partly frosted glass. Top: Spun aluminium or spun copper. Wall box: Die cast aluminium. Wall box cover: Spun aluminium or spun copper. Arm: Copperplated, red brass or steel.
Mounting: Terminal block: 1x3x2.5mm². Cable entries: 2x bottom + 3x rear entries for Ø 10-14.5mm cable. Looping: Approved, max. 3x1,5mm².
Weight: Max. 4.5kg.
Class: Ingress protection IP44. Electric shock protection I w. ground. F-mark: Yes.
Info notes: The control gear is placed in the fixture head. Please note that the copper versions are untreated in order to achieve a verdigris finish during time. This can result in an inconsistent surface finish prior to the product achieving full patina.
More
Nyhavn Wall
Architonic id 1033724
Louis Poulsen | The latest products
Share
Tweet
Stumble
