Nuda by Artemide Outdoor

Composed by lamp and recessing box for recessed wall installation.
Lamp unit in painted die-cast EN-AB 44100 aluminium, complete with holding plate for electrical components. Specular reflector in aluminium. It conveys and diffuses the luminous flow downwards ensuring visual comfort. UV resistant diffuser in shock resistant polycarbonate with satiny finish. Aesthetic cover in painted aluminium. Painting is obtained by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint. AISI 316 stainless steel screws and silicone seal gasket. Provided with IP67 cable and connector suitable for H07RN-F cables with a diameter from 5 to 13.5 mm for the mains connection. Recessing box in reinforced polymer, can be ordered separately. Series of light fixtures with direct unilateral or bilateral emission, with high-performance LED light sources. Floor and recessed installation. Available in two finishes: light grey painted and rust painted.

Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class II.

H=50 cm
Available in unilateral and bilateral emission version. Composed by lamp, support pole and ground mounting plate. Lamp unit in die-cast EN-AB 47100 aluminium. UV resistant diffuser in shock resistant polycarbonate with satiny finish. Specular reflector in aluminium. It conveys and diffuses the luminous flow downwards ensuring visual comfort. Support pole in extruded EN-AW-6060 aluminium,
chromate treated and painted. Mounting plate in folded, welded and painted steel, with holes for ground fixing by means of log bolts or dowels. Painting is obtained by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.

AISI 316 stainless steel screws and silicone seal gasket. Provided with IP67 cable and connector for the mains connection.
Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class II.

H=100 cm
Available in unilateral and bilateral emission version. Composed by lamp, support pole and ground mounting plate. Lamp unit in die-cast EN-AB 47100 aluminium. UV resistant diffuser in shock resistant polycarbonate with satiny finish. Specular reflector in aluminium. It conveys and diffuses the luminous flow downwards ensuring visual comfort. Support pole in extruded EN-AW-6060 aluminium,
chromate treated and painted. Mounting plate in folded, welded and painted steel, with holes for ground fixing by means of log bolts or dowels. Painting is obtained by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.

AISI 316 stainless steel screws and silicone seal gasket. Provided with IP67 cable and connector for the mains connection.
Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class II.