Metal by Mas Office

Metal

Manufacturer

Designer Josep Verdaguer
Launched in 2008
Architonic id 1136754

Send page
Print page
Save page
QR-Code
Monobloc or dismantlable metal lockers designed for dynamic changing rooms, combining maximum functionality with good design and ergonomics. They incorporate a variety of environmental concepts aimed at achieving lockers that are in tune with the environment throughout their life cycle.

STANDARD:
1S
Monobloc lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished with epoxy paint, following a procedure with a low environmental impact. Colours can be chosen from the range offered.
Very hard-wearing units that ensure a useful lifespan of at least 25 years.
Each unit has a top shelf with support for clothes hangers and a bottom shelf acting as a shoe divider. The inside of the door is fitted with a towel rail. A variety of bodies consisting of 1, 2, 3 or 4 doors, with a width of 300 or 400 mm.
All the doors have a card reader, ventilation grille and independent lock with two keys. Locks with mastering or the fitting of different types of lock (coin-op locking, knob with padlock, combination lock) can be obtained on demand.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE11016:1989 and UNE11017:1989.

NEO:
2MDS
Monobloc lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Very hard-wearing units that ensure a useful lifespan of at least 25 years.
Ventilation is provided at the top and bottom of the locker. The door is fitted with a card reader. There are a variety of bodies consisting of 1, 2, 3 or 4 doors, with a width of 300 or 400 mm. All the doors are fitted with independent locks with two keys. Locks with mastering or the fitting of different types of lock (coin-op locking, knob with padlock, combination lock) can be obtained on demand.
Each unit has a top shelf with support for clothes hangers and a bottom shelf acting as a shoe divider. The inside of the door is fitted with a towel rail, and a compartment can be fitted for an umbrella holder or soap tray.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE11016:1989 and UNE11017:1989.

2ML
Monobloc lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Very hard-wearing units that ensure a useful lifespan of at least 25 years.
Lockers with L-shaped compartments, and bodies consisting of 2, 4 or 6 doors, with a width of 300 or 400 mm. Each of these is fitted with a support for clothes-hangers. Ventilation is provided at the top and bottom of the locker. The door is fitted with a card reader. All the doors have an independent lock with two keys. Locks with mastering or the fitting of different types of lock (coin-op locking, knob with padlock, combination lock) can be obtained on demand.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE11016:1989 and UNE11017:1989.

Z
Framed or dismantlable monobloc lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Very hard-wearing units that ensure a useful lifespan of at least 25 years.
1,800x600x500 cabinets- ideal for storing cleaning and hygiene materials or products. Various interior options are offered to adapt to the user. It is also possible to adjust the height of the shelves.
Various tests have been performed, in accordance with UNE11016:1989 and UNE11017:1989.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.

BENCH:
BS1000
Benches for changing rooms, common rooms, sports centres, etc. Models made of a stable, square-tubed framework of recycled steel, completely recyclable at the end of useful life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact. Slats of solid PEFC certified Flanders pine wood, varnished with nitro-cellulose lacquer.
Different models depending on the accessories incorporated, such as: shoe rack, clothes hanger, shelf bracket and backrest, and can be single or double.
The framework is coated in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system. The seat assembly is transported assembled, and the other parts dismantled in order to minimise empty spaces in the lorries.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
BY and BS measurements: 1,000, 1,500, 2,000 x 440 x 340
BP measurements: 1,000, 1,500, 2,000 x 1,880 x 370 or 710
Various tests have been performed, in accordance with UNE11016:1989 and UNE11017:1989.



More More
Similar products