LineaLed Wallwasher by Artemide Outdoor
Carlotta de Bevilacqua
Light fixture with high-performance LED light sources.
Walk-over and drive-over recessed floor installation. Walk over and drive over approved up to 5000Kg. 4 sizes (300mm, 500mm, 780mm,978mm). Monochromatic light. Composed by body in extruded aluminium, protection glass; provided with junction box for input/output connection. Electrical connection to the ballast by means of 100cm-long two-pole cable H05RN-F, with IP67 quick-release terminal block which is supplied with the fixture and can be housed in the recessing box. Body in extruded EN AW6060 T5 aluminum. Polycarbonate stoppers with silicone gasket. 8mm-thick non-slip transparent tempered glass. Glass surface temperature lower than 50°.
Recessing box for laying in AISI 304 steel, with stoppers and accessories for connection (to be ordered separately). 24Vdc remote ballast. Body fastened to the recessing box by means of proper pre-stressed steel springs supplied with the fixture. Painted profile with 2-stage outdoor treatment: primer, outdoor paint. Optics. PMMA lenses in 3 different versions of beams. 10°, 30°, 40°. White monochromatic LEDs available in 2 colour temperatures: Warm = 3000K, Neutral = 4000K. IP Rating IP65-IP67. Insulation class III.
LineaLed wallwasher 30: Connect a maximum number of 10 fixtures in a continuous line.
LineaLed wallwasher 50: Connect a maximum number of 5 fixtures in a continuous line.
LineaLed wallwasher 80: Connect a maximum number of 3 fixtures in a continuous line.
LineaLed wallwasher 100: Connect a maximum number of 2 fixtures in a continuous line.
Technical features of light fixtures in compliance with EN60598-1. Installation must be carried out by specialized personnel. Carefully follow the instructions.
Product group: Recessed floor lights Flood lights / washlighting LED lights Flood lights LED recessed floor lights
Designer: Carlotta de Bevilacqua
Artemide Outdoor | The latest products