Horizon by LAB23



Designer Stéphane Chapelet
Architonic id 1151347

Send page
Print page
Save page
The HORIZON bench or chair is in galvanised and polyester powder coated steel, T. 60/10, (or Corten treated with a particular oxidation cycle).
The seat is obtained bending a steel sheet plate in three points, while two reinforcing plates are fixed to the lower part in order to reinforce the seat, H. 30 mm.
There is also a version with a backrest, which is fixed to the seat by four stainless steel M8 screws. Between the seat and the backrest there is a distance of 20 mm, created by stainless steel AISI 304 brushed tubes, 20x2 mm.
There is also a version with a wooden seat made of a plank in solid exotic wood, 1690x300 mm T. 40 mm, treated with natural waterproof oils. At the centre of the wooden element there are two millings shaped by controlled three-dimensional pantograph, 1590x20 mm. The wooden element is fixed to the bearing structure through solid steel EN10111DD1 brackets, T. 60/10, screwed on 10 M6 electro-welded pins. The base of the metal structure has 4 holes for the ground fixing through appropriate bolts.

Maximum dimensions
H seat= 430 mm
H backrest = 760 mm
Length = 1800/550 mm
Width of the seat = 450 mm
Width = 460/680 mm (with backrest)

More More
Similar products