Cooling and Heating by Kreon
Air is an essential element of life, a basic requirement that is often translated into a purely technical solution. Kreon guards against this and sees it as a challenge to treat freshening of air and oxygen as a valuable architectural detail, providing both a noiseless and an aesthetical solution.
Good air quality is an essential requirement for every indoor environment. It has direct effects on performance and health of people who use these places. To ensure optimum air quality, Kreon ́s ventilation system Vento offers a solution that is extremely efficient as well as elegant. Vento system consists of a highly inductive ventilation element, which can be discreetly installed between Kreon tiles. It provides draught-free and diffuse ventilation with minimum airflow. The high- induction ventilation element ensures an optimum mixture of supply and ambient air. The specially designed ventilation element is standard delivered in black, but any required ceiling colour is also possible. It ensures optimum air discharge at a 45° angle, which prevents soiling on the ceiling.
Vento system can be mounted in ceilings where high aesthetic standards are required. It is available with a visible width of 15mm and 18mm. Our technical staff will gladly advise you in selecting the appropriate profile.
The discharge section of Vento profile is perforated so that air enters the room through numerous fine and individual jets (each approximately 3mm in cross section). These jets are mainly directed into the room under an angle of 45°. Another smaller portion of jets discharge vertically downwards. This combination stabilises the flow and fills the flow pattern centre with air. High induction, with the associated rapid reduction in airstream temperature, is a further positive feature of the diffuser concept. It reduces drastically the dependence of airflow patterns within a room on supply-air temperature and room height.
With non-insulated plenum boxes, there is a considerable loss of energy. For this reason is the system supplied with air chamber insulation which drastically reduces the loss in energy.
- Try to achieve a parallel spacing of diffusers with B ≤ 2.5m for a room height of ca. 3m.
- Aim for uniform arrangement of diffusers in the room.
- Arrange diffusers at right angels to the façade.
- Dimension C: parallel distance from walls ≥ 1m. For smaller values, the specific supply-air volume must be reduced.
Kreon | The latest products